Palladium-pincer complex catalyzed C-C coupling of allyl nitriles with tosyl imines via regioselective allylic C-H bond functionalization

A mechanistically new palladium-pincer complex catalyzed allylation of sulfonimines is presented. This reaction involves C-H bond functionalization of allyl nitriles under mild conditions. The reaction proceeds with a high regioselectivity, without allyl rearrangement of the product. Modeling studies indicate that the carbon-carbon bond formation process proceeds via (eta (1)-allyl)palladium pincer complex intermediates.     

Stereoselective Pincer-complex catalyzed C-H functionalization of benzyl nitriles under mild conditions. An efficient route to beta-aminonitriles

An efficient palladium pincer-complex catalyzed reaction has been developed for alpha-C-H bond functionalization of benzyl nitriles. The studied coupling reaction with sulfonylimines affords beta-aminonitriles with usually high levels of stereoselectivity. The stereoselectivity of the process is highly dependent on the electronic effects of the ortho substituents of the benzyl moiety. Promising levels of enantiomeric excess are obtained using chiral pincer complexes as catalysts.     

Time-resolved investigations of laser-induced plasmas generated by nanosecond bursts in the millijoule burst energy regime

Laser-induced plasmas are investigated during laser micro structuring of a C 75 steel alloy using laser bursts that consist of nanosecond laser pulses under atmospheric pressure. The influence of the laser burst mode — single and collinear double pulses — on plasma dynamics and ablation efficiency is investigated for burst energies in the millijoule regime. Electron density and excitation temperatures measured as a function of time. The results are compared with published data looking for changes of the plasma parameters scaling with the burst energy over two orders of magnitude. For collinear double pulses at burst energies of 1–2 mJ an increase of the ablation rate by a factor of three to four compared to single pulses was observed.     

Detection of microphase separation in poly(tert-butyl acrylate-b-methyl methacrylate) synthesized via atom transfer radical polymerization by inverse gas chromatography

A trace amount of solvents such as n-octane, n-nonane, n-decane, ethyl acetate, n-propyl acetate, isoamyl acetate, toluene, ethyl benzene, n-propyl benzene, isopropyl benzene and chloro benzene was passed through the column of a gas chromatograph of which the stationary phase is poly(tert-butyl acrylate-b-methyl methacrylate), poly(tBA-b-MMA), block copolymer with low polydispersity, prepared via ATRP of tBA and MMA, respectively. The retention diagrams to determine the thermal transition of the polymer were obtained by plotting the logarithm of the specific retention volumes of isoamyl acetate and toluene against reciprocal values of absolute column temperatures between 40 and 170 °C by inverse gas chromatography (IGC) technique. Three glass transition temperatures, T_gs of poly(tBA-b-MMA) were determined at 50, 70 and 105 °C by IGC indicating the phase separation of the polymeric blocks in the copolymer. The thermodynamical interaction parameters such as weight fraction activity coefficient of solvent at infinite dilution, , Flory-Huggins polymer-solvent interaction parameter, , equation-of-state polymer solvent interaction parameter, , effective exchange energy parameter, X_eff, and solubility parameter of the copolymer, δ₂ were calculated at studied temperatures. The closeness of parameters of the poly(tBA-b-MMA) to those of the PMMA indicated that the continuous phase is MMA block in the microphase separated block copolymer. It seems that IGC is a reliable technique to study a phase separated block copolymer which contains nanosized domains.     

Polymer/clay nanocomposites through multiple hydrogen‐bonding interactions

An 2‐ureido‐4[1H]pyrimidinone (UPy) motif with self‐association capability (through quadruple hydrogen bonds) was successfully anchored onto montmorillonite clay layers. Polymer/clay nanocomposites were prepared by specific hydrogen bonding interactions between surface functionalized silica nanoclays and UPy‐bonded supramolecular poly(ethylene glycol) or poly(?‐caprolactone). The mixed morphologies including intercalated layers with a non‐uniform separation and exfoliated single layers isolated from any stack were determined by combined X‐ray diffraction and transmission electron microscopic measurements. Thermal analyses showed that all nanocomposites had higher decomposition temperatures and thermal stabilities compared with neat polymer. The differential scanning calorimetric data implied that the crystallinity of polymers did not show essential changes upon introduction of organomodified UPy clays. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 650–658     

In situ synthesis of A3‐type star polymer/clay nanocomposites by atom transfer radical polymerization

A series of A₃‐type star poly(methylmethacrylate)/clay nanocomposites is prepared by in situ atom transfer radical polymerization (ATRP) initiated from organomodified montmorillonite containing quaternary trifunctional ATRP initiator. The first order kinetic plot shows a linear behavior, indicating the controlled character of the polymerization. The resulting nanocomposites are characterized by spectroscopic (XRD), thermal (DSC and TGA), and microscopic (TEM) analyses. The exfoliated nanocomposite has been obtained when polymerization was conducted with 1% of organic clay loading. Thermal analyses show that all nanocomposites have higher glass transition values and thermal stabilities compared to neat polymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5257–5262     

New calculations of cyclotron production cross sections of some positron emitting radioisotopes in proton induced reactions

In this study, new calculations on the excitation functions of ¹³C(p,n)¹³N, ¹⁴N(p,a)¹¹C, ¹⁵N(p,n)¹⁵O, ¹⁶O(p,a)¹³N, ¹⁸O(p,n)¹⁸F, ⁶²Ni(p,n)⁶²Cu, ⁶⁸Zn(p,n)⁶⁸Ga and ⁷²Ge(p,n)⁷² As reactions have been carried out in the 5–40 MeV incident proton energy range. In these calculations, the pre-equilibrium and equilibrium effects have been investigated. The pre-equilibrium calculations involve hybrid model, geometry dependent hybrid model, the cascade exciton model and full exciton model. Equilibrium effects were calculated according to Weisskopf-Ewing model. The calculated results have been compared with experimental data taken from literature.      

Silica Gel-Immobilized 5-aminoisophthalohydrazide: A novel sorbent for solid phase extraction of Cu,Zn and Pb from natural water samples

A novel silica sorbent, silica gel-immobilized 5-aminoisophthalohydrazide (SiO₂-APH), was prepared by the condensation of 3-chloropropyl-functionalized silica gel with 5-aminoisophthalohydrazide (APH) derived from dimethyl 5-aminoisophthalate as a starting material and used for separation and preconcentration of Cu, Zn, and Pb metals in water samples using Flame Atomic Absorption Spectrometry (FAAS). The characterization of the new sorbent was carried out by Elemental Analysis, Thermogravimetric Analysis (TGA) and Fourier Transform Infrared Spectroscopy (FTIR). Important analytical parameters including as pH, amount of sorbent, type and amount of eluting solvent, sample volume, vortex and ultrasonic bath time, matrix ions that effect the developed SiO₂-APH-solid phase extraction (SPE) method were investigated and optimum parameters were detected. Recoveries of examined metals were obtained as 98% for Cu and Pb and 101% for Zn. The relative standard deviation (RSD, n = 8) of Cu, Zn and Pb metals were 3.2, 2.8 and 1.6%, respectively. Limit of detections (LODs) (n = 10) were found as 2.7 μg L⁻¹ for Cu, 7.4 μg L⁻¹ for Zn and 3.5 μg L⁻¹ for Pb μg L⁻¹. The accuracy of the new method was assessed by analyzing of TMDA-51.4 and TMDA-70.2 certified reference materials. The results obtained for metals were in a good agreement with certified values. Addition/recovery test was applied to the real well, river, dam and stream water samples to check the accuracy of the method. The results showed that the developed SiO₂-APH-SPE method can be effectively used as an alternative method for determination of Cu, Zn, and Pb metals in water samples.     

Are o‐nitrobenzyl (meth)acrylate monomers polymerizable by controlled‐radical polymerization?

We report on the controlled‐radical polymerization of the photocleavable o‐nitrobenzyl methacrylate (NBMA) and o‐nitrobenzyl acrylate (NBA) monomers. Atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer polymerization (RAFT), and nitroxide‐mediated polymerization (NMP) have been evaluated. For all methods used, the acrylate‐type monomer does not polymerize, or polymerizes very slowly in a noncontrolled manner. The methacrylate‐type monomer can be polymerized by RAFT with some degree of control (PDI ∼ 1.5) but leading to molar masses up to 11,000 g/mol only. ATRP proved to be the best method since a controlled‐polymerization was achieved when conversions are limited to 30%. In this case, polymers with molar masses up to 17,000 g/mol and polydispersity index as low as 1.13 have been obtained. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6504–6513, 2009     

The performance,emissions, and combustion characteristics of an unmodified diesel engine running on the ternary blends of pentanol/safflower oil biodiesel/diesel fuel

Journal of Thermal Analysis and Calorimetry - The objective of the present study is to scrutinize the influence of a binary blend of diesel–safflower oil biodiesel and ternary blends of...